S5 | Command Line Editing Character (user defined) |
Range: | 0−32, 127 |
Default: | 8 (backspace) |
Units: | ASCII |
This register sets the character recognized as a backspace and pertains to asynchro- nous only. The modem will not recognize the backspace character if it is set to a value that is greater than 32 ASCII. This character can be used to edit a command line. When the echo command is enabled, the modem echoes back to the local DTE the backspace character, an ASCII space character, and a second backspace character. This means a total of three characters are transmitted each time the modem processes the backspace character.
S6 | Wait Before Dialing |
Range: 2-65
Default: 2
Units:seconds
This register sets the length of time, in seconds, that the modem must wait (pause) after going
S7 | Connection Completion |
Range:
Default: 50
Units:seconds
This register sets the time, in seconds, that the modem must wait before hanging up because carrier is not detected. The timer is started when the modem finishes dialing (originate), or goes
S8 | Comma Dial Modifier Time |
Range:
Default: 2
Units:seconds
62