152-388-100-02, Issue 2

Provisioning

 

 

PROVISIONING TASKS

After the HiGain Line Unit is successfully installed, perform these basic provisioning tasks:

1Set the date and time (see “Setting Date and Time” on this page)

2Set the circuit ID numbers (see “Setting Circuit ID Numbers” on page 14)

3Make any necessary configuration changes (see “Configuring the System” on page 15)

4Clear history, alarm, and event log screens to remove miscellaneous data during startup (see “Clearing the History, Alarm, and Event Log Screens” on page 21)

Setting Date and Time

Monitor

Performance Event Log

 

Config

Inventory

Rlogon Help

 

 

+----------------------

 

 

 

+

 

 

 

 

 

 

 

 

 

 

Standard Options ->

 

 

 

 

PairGain Options ->

 

+

Date and Time

->

 

+

-------------------------------

 

 

 

 

 

Date (mm/dd/yyyy):

04/15/2000

Time (hh:mm[:ss]): 12:30:01

+

-------------------------------

 

 

 

 

 

+

ID: xxxx--xxxx--xxxx--xxxx

04/15/00 12:30:01

H2TU-C

System: OK

Figure 4. Configuration Menu - Date and Time

1Type C to select the Config menu.

2Select Date and Time, then press ENTER .

3Enter the date in the format indicated, then press ENTER .

4Enter the time in the format indicated (entering seconds is optional), then press ENTER .

H2TU-C-388 List 1

June 6, 2000

13