152-388-100-02, Issue 2

Provisioning

 

 

Clearing the History, Alarm, and Event Log Screens

Clear the History, Alarm and Event Log screens after the system has been installed and is functioning properly. This removes miscellaneous data acquired during the startup session and ensures collection of accurate and meaningful data thereafter.

Monitor

Performance Event Log

Config

Inventory

Rlogon Help

 

----------------------+

 

 

+

 

Standard Options ->

 

 

PairGain Options ->

 

 

Date and Time

->

 

Master Clear

 

 

 

Set Factory Defaults

+----------------------

 

+

Clear ALL performance, alarm and event

log entries.

Are you sure (Y/N)?

ID: xxxx--xxxx--xxxx--xxxx

04/15/00

12:30:01

H2TU-C

System: OK

Figure 10. Master Clear

To clear the Event Log, type E to select the Event Log screen, then type L to clear the screen.

To clear an individual history or alarm screen, do the following:

1Type P to select the Performance screen.

2Press the SPACEBAR to select either interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2 or H2TU-R HDSL2), then press ENTER .

3Press the SPACEBAR to select the type of statistics (Current, Alarm History, 25 Hour History, 48 Hour History, or 31 Day History) and press ENTER after your selection.

–Selecting 31 Day History allows you to clear the Current, 25-hour, 48-hour, and 31-day performance history screens for the selected interface.

–Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For information about the DS1 and HDSL2 Alarm screens, see Table 11 on page 32.

4Type L to clear the screen.

To clear ALL history, alarm, and event log screens by this method:

1Type C to select the Config screen.

2Select Master Clear.

3Type Y to clear all screens.

H2TU-C-388 List 1

June 6, 2000

21