SNFS
Step 4 Edit /usr/cvfs/config/cvlabels so that it contains a list of StorNext FS label names that correspond to the device names of the drives captured in Step 2.
You can create any convention for the label names. For example, if a site consists of
12 Fibre Channel drives, you can use CvfsDisk[n] for each label name. Replace [n] with a decimal number starting at 0 and increment the number for each drive. In this case, the label name entries in the file would be: CvfsDisk0, CvfsDisk1, CvfsDisk2, and so on. For example:
#Solaris Example
#Drives 0 through 11 will be used for Regular Stripe Groups, # so the entire volumes are used (total sector sizes are used # since optional sector sizes are not specified).
#
# Regular file disks - use entire volume
CvfsDisk0 [device_name0]
CvfsDisk1 [device_name1]
CvfsDisk2 [device_name2]
CvfsDisk3 [device_name3]
CvfsDisk4 [device_name4]
CvfsDisk5 [device_name5]
CvfsDisk6 [device_name6]
CvfsDisk7 [device_name7]
CvfsDisk8 [device_name8]
CvfsDisk9 [device_name9]
CvfsDisk10 [device_name10]
CvfsDisk11 [device_name11]
Step 5 After the cvlabels file is complete, label the disk drives using the cvlabel command.
#cd /usr/cvfs/bin
#./cvlabel
Follow the
