ADIC 2.2 manual # /etc/init.d/rawdevices restart

SNFS

•If you use a Uniprocessor system, install the server and client files, including the word up in the filenames. For example:

#rpm -ivh cvfs-server.7.3_2417up-2.1.1-62.i386.rpm

#rpm -ivh cvfs-client.7.3_2417up-2.1.1-62.i386.rpm

•If you use a Multiprocessor system, install the server and client files, including the word smp in the filenames.

#rpm -ivh cvfs-server.7.3_2419smp-2.1.1-62.i386.rpm

#rpm -ivh cvfs-client.7.3_2418smp-2.1.1-62.i386.rpm

Step 5 Add /usr/cvfs/bin to root’s search path and /usr/cvfs/man to the MANPATH.

Step 6 In the /etc/profile file, modify the ulimit command to enable the system to produce core files. Enter:

#ulimit -S -c 0 > /dev/null 2 > &1

#ulimit -c unlimited > /dev/null 2 >&1

Step 7 Remove the CD from the drive.

Step 8 Edit the /etc/sysconfig/rawdevices file to provide mapping from block device to raw device for all Fibre Channel (FC) devices.

To prevent the accidental overwriting of disks and/or LUNs not used CAUTION by StorNext FS (such as the system boot disk), do not include them

in the rawdevices file.

Every FC device that StorNext FS will use must have an entry with the format <rawdev> <blockdev> in this file. For example, to add three SCSI devices to the file, the format would be:

/dev/raw/raw1 /dev/sdb /dev/raw/raw2 /dev/sdc /dev/raw/raw3 /dev/sdd

Step 9 Activate the raw devices. Enter:

# /etc/init.d/rawdevices restart

5-10 6-00905-01 Rev A