For the most part, installation is simply a matter of checking all necessary SCSI connections, installing the application software (backup or otherwise) on the host computer, and applying power. The FastStor defaults set at the factory should be sufficient for most applications.
Unpacking and Inspecting
Caution
If the operating environment differs from the storage environment by 15° C (30° F) or more, let the unit acclimate to the surrounding environment for at least 12 hours.
Unpack all items from the carton. Save the packing materials in case you need to move or ship the system in the future.
Caution
You must ship the FastStor in the original or equivalent packing materials or your warranty may be invalidated.
Checking the Accessories
Check to make certain that the following items are included with your FastStor:
•Power cord
•One cleaning cartridge, or a coupon for a free DLT cleaning cartridge
•One SCSI cable with
•One active
•A Media Carrying Tote with plastic lid
•This manual
•A Quick Reference Guide
•A Warranty Registration card
•Two keys for the front door
✔None of the items should show signs of damage.
Installing the Host Adapter
At this point if your host computer system does not have native SCSI capability and the host adapter you are using is not installed, please install it. Refer to the manual that came with your host adapter for specific directions.
When the host adapter card is installed return to this point in the manual.
12Hardware Installation
