ADS Technologies version 5.2b1 Connect to the USB Interface, Connecting to the USB Interface

Hardware Installation

2.6 Connect to the USB Interface

Step 1. Plug the Type-B (square-shaped) end of the USB detachable cable (included) into the USB port of the modem.

Step 2. Plug the Type-A (flat-shaped) end of the USB detachable cable into the USB port of your PC.

Step 3. Do not turn on the power switch until software installation is

complete. Proceed to Section 3.11 “Installing the Software Drivers.”

Figure 2.7 Connecting to the USB Interface

2-7