Hardware Installation
2.2 Safety First
Personal Safety
•In case of emergency, locate the closest electricity
•Refrain from touching any active wires or terminals.
•Remove jewelry before working on equipment connected to electricity.
•Keep cables away from walkways.
•Dispose of this product in accordance with national laws and regulations.
Product Handling
•Keep ventilation slots clear.
•Operate in a clean and
•Cables must be attached to the correct interfaces; to do otherwise may result in damaging the modem or produce hazardous voltage.
•Do not operate or store the product in an environment that surpasses temperature or humidity specifications.
2.3Setup Instructions
Step 1. Choose a location for the NetDSL close to a power outlet and a telephone line outlet. Preferably select a convenient location that does not experience too much foot traffic and is away from sunlight.
Step 2. Choose a level surface for the NetDSL – such as a desk top, shelf, or table.
Step 3. Place the NetDSL on the predetermined surface, so you can see the back panel.
