Hardware Installation

2.4 Connect to the Ethernet

Step 1. Locate your Ethernet cable (included).

Step 2. Attach the Ethernet cable to the Ethernet interface of your NetDSL.

Step 3. Plug in the loose end of the Ethernet cable to your Ethernet network.

Option 1. Attach the included Ethernet cable to the Ethernet port on a PC.

Figure 2.3 Connecting to a Ethernet Port on a PC

Option 2. Attach the included Ethernet cable to the uplink port on a hub.

Figure 2.4 Connecting to the Uplink Port on a Network Hub

Option 3. If the uplink port is unavailable, then you can use a crossover Ethernet cable (Not included) and attach it to the non-uplink

2-4NetDSL Software User’s Guide

Page 10
Image 10
ADS Technologies version 5.2b1 manual Connect to the Ethernet, Connecting to a Ethernet Port on a PC