Minimum System Requirements

1.3Minimum System Requirements

ADSL line

10BaseT Ethernet or USB interface

CD-ROM drive

NetDSL gives you the option of configuring the modem using the Arescom NetDSL Manager. The system requirements for each are listed below:

Using the NetDSL Manager:

Ethernet card

PC* with at least a 486 microprocessor (Pentium® recommended)

CD-ROM drive

At least 4 MB of space available on the hard disk drive

Microsoft® Windows® 95/98/2000 or Windows® NT 4.0 Operating System

*You may configure the NetDSL from any PC attached to the Local Area Network (LAN) with the requirements listed above.

1.4 Information You Will Need

To configure your modem, you will need to receive information from the remote network to which you will connect, such as an Internet Service Provider (ISP) or a company server. Consult the section below for a detailed list of information on utilizing the Ethernet interface and the DSL interface. If you are unfamiliar with any of the terms listed, refer to Appendix A, “About Configuration Parameters.”

The following information should be obtained from your ISP or company server.

VPI

VCI

DSL line code

You MAY need the following information from your ISP or company server based on your network setup:

IP Address

Subnet Mask

Gateway IP Address

PPP User name & Password

DNS Address

1-2NetDSL Software User’s Guide

Page 6
Image 6
ADS Technologies version 5.2b1 manual Minimum System Requirements, Information You Will Need