Configuration
Discard:Packet is blocked and discarded.
Pass to next filter: Packet goes to the next filter in sequence.
When you are finished, click OK. If you do not want to create an bridge packet filter, click Cancel to close the Add New Bridge Packet Filter window.
Modify Bridge Packet Filter
If you want to change the parameters of an bridge packet filter, select the filter number, and then click Modify. This will open the Modify Bridge Packet Filter window. You can change any of the parameters or settings. When you are finished, click OK. If you do not want to modify this filter, click Cancel to close the Modify Bridge Packet Filter window.
Remove Bridge Packet Filter
To delete a filter, select the filter number, and then click Remove. Click Yes to remove the selected filter or click No to keep it.
Once you have finished setting these parameters, click Apply to review the parameters you have entered and then click Finish to send settings to the NetDSL. Click Exit to return to the NetDSL Manager.
