Configuration
5.2 Outline of Configuration
With the Configuration feature you have the flexibility to configure one parameter at any time and to change more technical default settings. The Configuration window is organized in a hierarchical tree format. From the NetDSL Manager, click General Configuration to access the General Configuration window. Click on the item that you wish to configure, and then set the parameters.
General Configuration
•Administrative Security: Sets your modem’s name and enables password protection (optional).
•Bridge Packet Filtering Table:Monitors and selectively filters packets that enter or leave the NetDSL.
LAN Configuration
•LAN Configuration: Allows you to set the primary and secondary IP addresses and Subnet Mask information for the LAN.
DSL Configuration
•ATM PVC Properties: Allows you to specify the name of the ATM Permanent Virtual Circuit (PVC), and the values of Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI).
•ATM Service Type: Allows you to choose the ATM service category supporting your ATM connection and the rate parameters associated with the service: Unspecified Bit Rate (UBR) and Constant Bit Rate (CBR). From this panel you can specify the Peak Cell Rate (PCR) in kbps, and you can set the Operations and Maintenance (OAM) F5 timer period. If the period is set to zero, the OAM F5 loopback cell will not be sent. If the period is
Configuration File
•Save Configuration File: Saves your customized configuration settings to your local hard disk drive as a configuration file (*.cfg). This is especially helpful for network management.
•Load Configuration File: Allows you to load any previously saved configuration file.
