ADTRAN TA 544 Maint Port Menu, Password Protect, Instructions for Changing Passwords Step Action

TA 544 User Manual/61200704L1-1A

Page 20 of 68

> Maint Port Menu

The TA 544’s VT 100 CRAFT port can be accessed via an RJ-48 located on the rear panel. The setup for these ports is under this menu.

Password Protect

When set to OFF, the maintenance port is not password protected. When ON (def), the TA 544 will prompt for a password upon startup.

Password

This is the text string that is used for comparison when password protecting the maintenance port. By default, no password is entered.

If you forget your password, type CHALLENGE in all capital letters. Call technical support and have the displayed CHALLENGE code ready.

The security level for the maintenance port is always set to 0. This gives full access to all menus.

Passwords are case-sensitive.

Instructions for Changing Passwords

Step Action

1Select the PASSWORD field—a new PASSWORD field displays.

2Type the new password in the ENTER field.

3Type the new password again in the CONFIRM field.

The password can contain up to 12 alphanumeric characters. You can also use spaces and special characters in the password.

TA 544 User Manual © 2001, ADTRAN, Inc.