TA 544 User
Page 26 of 68
Use the ATM CONFIG menu (Figure 7) to set the parameters listed below the figure.
Figure 7. ATM Config Menu
Idle Cells
The IDLE CELLS format must be configured for either ATM FORUM or ITU. Configuring this setting incor- rectly for a particular circuit will cause poor performance at the ATM layer.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of the circuit.
Data Scrambling
DATA SCRAMBLING can be ENABLED or DISABLED for cell traffic. Configuring this setting incorrectly for a particular circuit will cause poor performance.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of the circuit.
> ATM Stats
Use the WAN menu (Figure 6 on page 25) to access the ATM STATS menu (Figure 8 on page 27) and view the param- eters listed below the figure.
TA 544 User Manual | © 2001, ADTRAN, Inc. |
