ADTRAN TA 544 user manual 2001, ADTRAN, Inc

TA 544 User Manual/61200704L1-1A

Page 53 of 68

3.Select XMODEM for TRANSFER METHOD.

4.Press Enter on START TRANSFER <+>.

5.When prompted, press Y to erase flash.

When TA 544 is ready to receive the XMODEM upload, the menu screen will clear and display Transmit Flash . . . download file now. If this does not appear, please review the steps above for possible configuration errors.

6.From the terminal emulation software, begin the XMODEM upload by using the appropriate command sequence. (If necessary, refer to terminal emulation software documentation for help. Also, when specifying the filename, ensure that the file transferred is the one pro- vided by ADTRAN. Otherwise, the update will not complete successfully.)

Because XMODEM data is being transferred in-band through the menu interface, the VT 100 menus of TA 544 will be inoperable from the CRAFT port.

7.When the update has successfully completed, TRANSFER COMPLETE displays in TRANSFER

STATUS. The module restarts immediately and resumes operation. If an error occurs during the update, an error message will display in the TRANSFER STATUS field. If this occurs, return to Step 3 and attempt the update again. If the same error occurs, contact ADTRAN Techni- cal Support.

© 2001, ADTRAN, Inc. TA 544 User Manual