Manuals / ADTRAN / Computer Equipment / Network Card

ADTRAN TA 544 user manual Managing the Modules V.35 Setup, Mode, Configuration

Models: TA 544

1 68

Download 68 pages 5.28 Kb

Page 46

TA 544 User Manual/61200704L1-1A

Page 46 of 68

Managing the Modules – V.35 Setup

Use the V.35 SETUP menu to view and set the parameters shown in Figure 18.

Figure 18. V.35 Setup Menu

CHANNEL RATE and EIA settings are supported via this menu option. For all typical applications, these settings are left in their default states.

> ATM/FR IWF

This menu contains the setup and status for the ATM/Frame Relay interworking functions.

Mode

The MODE setting configures the V.35 port for FRF5 or FRF8 operation, depending upon the application being supported.

FRF5

This is also known as Network Interworking. Use this mode for Frame Relay over ATM.

FRF8

This is also known as Service Interworking. In this mode, the TA 544 performs a translation between Frame Relay and ATM protocols.

Configuration

The CONFIGURATION menu is used to support the configuration of Frame-to-ATM interworking, signaling formats, timeout values, and PVC settings.

TA 544 User Manual

© 2001, ADTRAN, Inc.

Image 46

ADTRAN TA 544 user manual Managing the Modules V.35 Setup, Mode, Configuration

Contents

1200704L1 4200704L3 Trademarks To the Holder of the ManualSafety Instructions Limited Product Warranty International Contact Information USA2001, ADTRAN, Inc Post-Sale Support Customer Service, Product Support Information, and TrainingPresales Inquiries and Applications Support Repair and ReturnTraining Training 800 615-1176, extContents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Firmware Updates Terminal MenuVoice Over DSL Application Unpack and Inspect the Unit Mount the UnitSystem Info Serial Number Bootcode RevisionPart Number Firmware RevisionNetwork Timing Mode System ConfigOperating Mode Telnet AccessSnmp Menu Instructions for Changing Passwords Step Action Password ProtectMaint Port Menu Network Time Upgrade Firmware System UtilityConfig Transfer Ping Dslam Type Configuring WAN SettingsATM Config Layer One InterfaceATM Stats Data ScramblingAP Rx OAM Cells AP Receive Cell ErrorsAP Rx Cells AP Receive Cells DiscardedDSL Rate Config Configuring the Router Configuration GlobalUse this menu to enter static routes to other networks Bridge Security Ethernet Ethernet MenuMAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not ARP cache Configuring the Router StatusSession Bridge TableConfiguring the Router Logs View Network LogWrap ClearConfiguring Voice Support Config Call ControlPVC Stats Configuring Voice Support StatusGateway Stats Voice StatsManaging the Modules Modules Modules TableConfiguration Managing the Modules V.35 SetupMode Following settings are used for FRF5 Following settings are used for FRF8 ATM Support Appendix A. Specifications and FeaturesNetwork Interface Isdn InterfacesManagement Options Security FeaturesPower Serial DataUpdating Firmware via a Forced Download Appendix B. Updating TA 544 Firmware using XmodemPress Enter until a menu appears Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Enu Path Left Pane Status Bar Ode Avigation H elpWindow Pane Navigation Right Window Pane NotationAdditional Terminal Menu Window Features Navigating Using the Keyboard KeysSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Appendix G. RFC1483 Quick Start IP Routing with NAT OptionsAppendix H. RFC1483 Quick Start Bridging Bridging Step ActionAppendix I. PPPoA Quick Start Guide