Appendix A. Specifications and Features | ADTRAN TA 544 guide

TA 544 User Manual/61200704L1-1A

Page 49 of 68

Appendix A. Specifications and Features

Network Interface

SDSL: (2B1Q Conexant Based)

•Line Rate: 160 kbps to 2.3 Mbps

•Physical Interface: RJ-48C

•Training: Conexant Autobaud Capable

•Echo Cancellation

G.shdsl: (ITU G.991.2 Compliant)

•Line Rate: 192 kbps to 2.3 Mbps

•Physical Interface: RJ-48C

•Rate Adaptive

•Improved Spectral Compatibility

•Echo Cancellation

ATM Support

•6 PVCs (1 Voice, 5 Data)

•IP over ATM (RFC 1483)

•RFC 1483 (Multiprotocol Encapsulation over ATM), PPPoA (RFC 2364)

•Full Traffic Shaping and QoS Support

•VBR-rt and UBR Support

•F5 OAM Loopback Capability

ISDN Interfaces

•4 S0 Ports

•Physical RJ-45 Interfaces

•Line: 4-wire (Tx and Rx Pair)

•Operating Mode: Full-duplex

•Data Rate: 2B+D ISDN (B=64kbps, D=16kbps); 128 kbps available

•PS1 and PS2 Powering to power ISDN phone

Routing Capability

•Ethernet 10/100BaseT (RJ-45)

•IEEE 802.3 and 802.1D (MAC Bridging)

•IP Support: TCP, RIP V1, RIP V2, UDP,

•ICMP, ARP, UDP Relay, SYSLOG

•PPP Support: LCP, IPCP, BCP, IPXCP

•DHCP Server to LAN

•DHCP from network (NAT)

© 2001, ADTRAN, Inc.

TA 544 User Manual

Image 49

ADTRAN TA 544 Appendix A. Specifications and Features, Network Interface, ATM Support, Isdn Interfaces, Routing Capability

Contents

1200704L1 4200704L3 To the Holder of the Manual Trademarks Safety Instructions Limited Product Warranty USA International Contact Information 2001, ADTRAN, Inc Presales Inquiries and Applications Support Customer Service, Product Support Information, and TrainingPost-Sale Support Repair and Return Training 800 615-1176, ext Training Contents 2001, ADTRAN, Inc Figures 2001, ADTRAN, Inc Terminal Menu Firmware Updates Voice Over DSL Application Mount the Unit Unpack and Inspect the Unit System Info Part Number Bootcode RevisionSerial Number Firmware Revision Operating Mode System ConfigNetwork Timing Mode Telnet Access Snmp Menu Instructions for Changing Passwords Step Action Password ProtectMaint Port Menu Network Time System Utility Upgrade Firmware Config Transfer Ping ATM Config Configuring WAN SettingsDslam Type Layer One Interface Data Scrambling ATM Stats AP Rx Cells AP Receive Cell ErrorsAP Rx OAM Cells AP Receive Cells Discarded DSL Rate Config Global Configuring the Router Configuration Use this menu to enter static routes to other networks Bridge Security Ethernet Menu Ethernet MAC Address WAN This is the network mask used for this interface Use this menu to configure IP settings When set to Y ES, only IP RIP updates are sent All incoming packets from the WAN are not Session Configuring the Router StatusARP cache Bridge Table Configuring the Router Logs Wrap Network LogView Clear Call Control Configuring Voice Support Config Gateway Stats Configuring Voice Support StatusPVC Stats Voice Stats Modules Table Managing the Modules Modules Configuration Managing the Modules V.35 SetupMode Following settings are used for FRF5 Following settings are used for FRF8 Network Interface Appendix A. Specifications and FeaturesATM Support Isdn Interfaces Power Security FeaturesManagement Options Serial Data Updating Firmware via a Forced Download Appendix B. Updating TA 544 Firmware using XmodemPress Enter until a menu appears Updating Firmware via the Console Menus 2001, ADTRAN, Inc Appendix C. Updating TA 544 Firmware using Tftp Message Meaning Message Meaning Status Bar Ode Avigation H elp Enu Path Left Pane Right Window Pane Notation Window Pane Navigation Navigating Using the Keyboard Keys Additional Terminal Menu Window Features Session Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix F. RFC1483 Quick Start IP Routing WAN Options Appendix G. RFC1483 Quick Start IP Routing with NAT Bridging Step Action Appendix H. RFC1483 Quick Start Bridging Appendix I. PPPoA Quick Start Guide