TA 544 User
Page 25 of 68
# Transmits
Total packets sent (read only).
# Receives
Total packets received (read only).
%Loss
Percentage loss based on ping returned from host (read only).
Configuring WAN Settings
> DSLAM Type
Set this to the type of DSLAM the TA 544 will be connecting to.
> Layer One Interface
This is the physical layer protocol used to connect the DSLAM to the TA 544.
> Layer Two Protocol
This is the data link layer protocol used to connect the DSLAM to the TA 544.
> ATM Config
Use the WAN menu (Figure 6) to access the ATM CONFIG menu.
Training Mode
Figure 6. WAN Menu
© 2001, ADTRAN, Inc. | TA 544 User Manual |