Chapter 3

Operation

 

 

MENU OPERATION

The TDU 120e uses a VT-100 type terminal to display con- trol and monitor menus. Initiate this mode by keying in <CTRL> PTT on the terminal once it is connected to the Control In or Craft port.

When you begin the Telnet session, you will be prompted for a password. The default password is ADTRAN. You can change this password using the MANAGEMENT sub- menu.

For detailed information on this method of control, see the Telnet/Terminal Main Menu on page 3-5.

You can also connect to the TDU 120e via Telnet. Before attempting to connect via Telnet, first define the IP ad- dress, the default gateway, and the subnet mask.

See DEFAULT UNIT PASSCODE in the Unit Access Table on

page 8-2 for details. The Telnet session will time-out after a predefined value that is also set in the MANAGEMENT menu.

Only one Telnet session can be active at one time.

61202156L2

TDU 120e User Manual

3-1

Page 43
Image 43
ADTRAN TDU 120e user manual Menu Operation