Chapter 8. Remote/Management Menus

UNIT ACCESS TABLE

This menu edits/creates the Unit Access Table and stores the Unit ID, Passcode, and Unit Type for units connected via chain ports or connected remotely to the TSU/TDU (see Figure 8-1).

An entry in the table is required only to support proxy SNMP MIB access or polling. For MIB access, an entry is required only if the unit's passcode is not the same as the DEFAULT UNIT PASSCODE, or the unit is a single port TSU Standalone.

It is not necessary to have an entry in this table for a remote unit in order to Telnet to it or forward SNMP traps from it. In the Telnet case, the Remote Menu Access menu is selected from the Main menu and a unit ID is entered which may or may not be in the Unit Access Table.

Units accessed via T-Watch PRO over TCP/IP use the unit ID and passcode set by T-Watch PRO running on the PC.

____________________________Unit Access Table________________________

Unit ID

Passcode

Type

Polled

Poll Status

20

DEFAULT

Standard

No

 

3

0033

Standard

Yes

UP

6

0095

TSU Standalone

No

 

8

0022

Standard

Yes

UP

1)Add New Unit

2)Modify Unit

3)Delete Unit

4)Default Unit Passcode 0022

5)OK

Figure 8-1. Unit Access Table

8-2

TDU 120e User Manual

61202156L2-1A

Page 110
Image 110
ADTRAN TDU 120e user manual Unit Access Table