Chapter 6. Utility Menu

Set Passcode

Change/Set a Passcode

The passcode can be changed or set at any time or elimi- nated altogether through the Utility menu item SET

PASSCODE.

The passcode can be numeric only. After entering the desired passcode, press Enter.

Set a null passcode at the SET PASSCODE menu by press- ing Enter without any numbers. This sets a null passcode and grants unlimited access.

Lost Passcode

If the passcode number is lost, contact ADTRAN Techni- cal Support for assistance (see page xi of this manual).

No Passcode Desired

At the NEW PASSCODE prompt (in the Set Passcode menu), press Enter without any numerical entry. The sys- tem nullifies the need to enter a password for subsequent use and proceeds to the Unit ID prompt.

If the unit is to be remotely accessed using T-Watch PRO, a passcode must be entered. When managing a number of units, the passcode can be the same for all.

Unit ID

This menu is used to access the current UNIT ID setting. Viewing is available in limited access mode. Editing or changing the UNIT ID requires the use of a password as in editing mode. Unit Identification numbers must be be- tween 2 and 999. If an out-of-range number is entered, the unit assumes the upper limit number of 999.

61202156L2-1

TDU 120e User Manual

6-3

Page 95
Image 95
ADTRAN TDU 120e user manual Set Passcode, Unit ID, Change/Set a Passcode, Lost Passcode, No Passcode Desired