6 Electrical Connection

6.1Contacting the battery modules

i

To make wiring easier, first remove the front panel(s)

of the external battery units.

 

Unscrew the two centered screws in front panel (1) using a suitable cross-slot screwdriver (recommended: Phillips PH1). Now reach behind the front panel on the right and the left and slide it a few millimeters to the left (2). The lock will be released you can take off the entire front panel towards the front (3).

Top slot cover

Bottom

slot cover

2

3 1

Fig. 12 : Removing the front panel of the battery extension; removing the top and bottom access slot covers

Each front panel has a top and bottom slot cover. Now remove the top slot cover in a front panel. If you are using more than one battery unit, remove both slot covers in all the other front panels so that you can wire that battery units all the way through.

32