This part stays in the rack!

5

4

3 2

Fig. 22: Removing the UPS front cover

6.Disconnect the internal battery connector and EBM battery connector. If the EBM cable is not connected to an EBM, unclip the EBM cable and move it to the left out of the way, see Figure 23.

7.Remove and retain the two screws on the battery cover plate, see Figure 23.

Fig. 23: Disconnecting the UPS internal batteries; Removal of the battery cover plate

8.Grasp an edge of the battery cover plate and pull it out gently. Remove and retain the battery cover plate. Figure 23 shows the location of the battery cover plate.

Carefully pull the handle on the battery tray and slide the battery package slowly out onto a flat, stable surface; use two hands to support the battery package, see Figure 24. Pay attention to the weight of the battery system, especially at the more powerful models.

66