Battery discharge

Batteries are currently

 

discharging, e.g. due

 

to a power outage.

Battery disconnected

Battery system not available

 

because currently not

 

connected.

7.3.2Event log

Up to 127 events are stored in the internal non-volatile event memory in the UPS. The last event that occurred is the first on the list, followed by other previous events. Similar to the messages and alarms, each event is shown in its own window.

An event is indicated along with the date and time, followed by a description in plain text. The numerical code facilitates error analysis and other procedures in dealing with the event that has occurred (also see Chapter 9.1.1 on pg. 59ff.). In the lower right- hand corner of the display, you will find the total number of events already stored as well as your position when scrolling through the window. “1/…” indicates the most recent, last stored event (= starting position when accessed).

If there are no events stored or if the event memory has been deleted (also see Chapter 7.3.6 on pg. 49ff.), the following message will appear: “No events in the event log”.

Accessing the event log

Access the event log by pressing “ESC” to go to the main menu and then pressing “▲” or “▼” to go to the “Event log” menu item (line appears highlighted) and then press “ENTER” (basis / starting point is the UPS status display).

Return to the UPS status display by pressing “ESC” again (or automatically after 5 minutes if no other keys are pressed).

46