7 Operation Mode and Operating

7.1First start-up

7.1.1Switching on the UPS

Insert the plug of the power cord into the correctly fused power outlet of your sub-distribution system. The UPS will be immediately supplied with power from the public power network. It will start up with an initialization phase, indicated by the AEG logo, which appears on the screen for 5 seconds. After that, you will see the following message:

UPS On

Now confirm the highlighted “UPS On” command by pressing “ENTER”. Hold the key pressed for approx. 1 second. The UPS will synchronize and switch into normal operating mode after just a few seconds. The display will switch to the UPS status display.

i

If there are no keys pressed for 5 minutes, the

EN

display will automatically switch back to the UPS

 

 

 

 

status display. Press “▲” to return.

 

 

 

 

7.1.2Switching off the UPS

UPS Off

Confirm: yes no

If the UPS is in operation, it is possible to access the command above by pressing “▲” when in the basic UPS status screen. Once you have confirmed the command again, the UPS will switch off or switch to bypass (depending on the setting selected).

To enable you to find the “UPS On” or “UPS Off” menu item more easily, the following symbol appears above the “▲” key:

39