Do not connect any household appliances or power tools to the UPS.
Never connect or switch on additional load segments during a power outage, i.e. when the UPS is operating in emergency power mode!
As a rule, if there has never been an overload in normal operation, there won’t be an overload in battery mode.
If the malfunction LED lights up and you hear a warning sound, there is a malfunction which causes the system to shut down. Follow the instructions provided in Chapter 9.1.
Then make sure that the wire jumper in the emergency shutdown plug is firmly in place and tighten the two outside screws on the plug (also see pg. 31, no.7).
If you want to use the emergency power off function, continue first with Chapter 8.4 on pg. 57.
The integrated emergency power off only serves to shut off the UPS voltage. This happens electronically and is not the same as an EMERGENCY STOP system according to DIN EN ISO 13850.
38