Instructions for use

Run a Washing Cycle

Brief Instructions

A washing cycle is run in the following steps:

0 1. Set the correct washing program:

Set the program and temperature with the program selector

Set any additional program(s)

2.Change the spin speed if necessary/select RINSE HOLD (SANS ESSORAGE).

3.Set DELAY TIMER (DEPART DIFFERE) if necessary.

4.Open the filling door and fill with washing.

5.Close the filling door.

6.Add washing detergent/care agent.

7.Start the washing program.

After the Washing Program Ends:

Attention! If the washing cycle ended with Rinse Hold, before opening the filling door carry out PUMP (VIDANGE), SPIN (ESSORAGE) or SHORT SPIN (ESSORAGE DELICAT).

8.Open the filling door and remove the washing.

9.Switch off the washing machine: Set the program selector to OFF (ARRET).

19

Page 19
Image 19
AEG 88830 manual Run a Washing Cycle, Brief Instructions, After the Washing Program Ends