AEG 88830 manual Not been removed

Instructions for use

Problem	Possible Cause	Remedy
	The transport packaging has	Remove transport packaging
		according to the installation
	not been removed.
		and connection instructions.
	The height-adjustable screw	Adjust in accordance with
		the installation and connec-
	feet are not correctly set.
		tion instructions.
The washing machine	There is not much washing in	This does not impair the
vibrates during opera-
	the drum (e.g. only one
tion or it is on an une-		function.
	dressing gown).
ven surface.
		Check the laying of the
	The water could not be com-	drainage hose and eliminate
	pletely pumped off before	the bend if necessary, or
	spinning because	clean the solution pump and,
	the drainage hose is bent or	if required, remove foreign
	the solution pump is blocked.	bodies from the pump
		housing.
The washing solution	Probably too much detergent	Meter the detergent exactly
of the main wash		in accordance with the man-
	was used.
froths up a lot.		ufacturer's information.
	The screw connection on the	Tighten the intake hose
	intake hose is leaky.	screw connection.
	The drainage hose is leaky.	Check the drainage hose and
		replace it if necessary.
	The washing solution pump	Close cover correctly.
	cover is not correctly closed.
Water is flowing out		Abort the program, remove
from beneath the	Washing in caught in the
		washing from the door and
washing machine .	filling door.
		start a new program.
		Shut the emergency drain
	The emergency drain hose is	hose off properly (see section
		"Performing an Emergency
	not properly shut off or it is
		Drain"). Call your after-sales
	not water-tight.
		service if the emergency
		drain hose is not water-tight.

34