AEG 88830 Completion of the Washing Program

Instructions for use

25

Completion of the Washing Program

Program sequence display

Prior to the start the program steps to be executed are

displayed by the program sequence display. The current

program step is displayed during the washing program.

Multi-display

The expected remaining run time (in min-

utes) until the completion of the program is

shown in the multidisplay.

3With the automatic program adaption by the control of the washing

machine (quantity and type of washing, balance error recognition, spe-

cial rinsing etc.) counting of the remaining run time can be stopped or

corrected.

Display RESIDUAL MOISTURE%/LOADING%

(HUMIDITE%/CHARGE%)

The following appears alternately at the display:

•The expected residual moisture of the washing

at the end of the program.

This value depends on the set spin speed.

•Load the washing drum (in steps of 10 percent.)

This value is displayed only in COTTONS/LINEN (BLANC/COULEURS)

programs and EASY-CARES/EASY IRON (MIXTES/FACILE A REPASSER).

The washing machine can recognise the load only fifteen minutes

after a program start.

As soon as a value for the load is pending the display alternates

between residual moisture and load.

Overloading of the drum is displayed in values higher than

100 percent (e.g.120).

3Due to the differences in the fabrics and in the filling quantity the

washing reaches for EASY CARE/EASY IRON (MIXTES/FACILE A

REPASSER) and DELICATES (DELICAT) a lower value for residual damp-

ness than with COTTONS/LINENS (BLANC/COULEURS).

Change the Spin Speed

The spin speed can still be changed or the rinse hold (display 0) be set

during the washing program.

Other settings cannot be changed.

Contents

Main Dear customer, 1 3 2 CONTENTS Instructions for use Setting up and connection instructions Page INSTRUCTIONS FOR USE 1Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2Disposal 2Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control panel Program Selector 2 3 Additional Program Buttons Consumption Values and Time Requirements Running Time Display 3 Page Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergnet and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Setting the Washing Program 3 Change the spin speed/Select rinse hold 3 Set the delay timer/soaking duration Delay timer Soaking duration 3 Opening and closing the filling door 3 Add the Washing 3 Add Washing Detergent and/Care Agent. 3 Start the washing program 3 Completion of the Washing Program 3 The washing cycle is finished/Remove the washing. 3 Program Tables Washing Separate Conditioning/Starching /Impregnating Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door Cleaning the drain pump 1 What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Emergency Unlocking of the Filling Door 1 Additional Rinse (RINSE+) Page 3 Additional Rinse and Solution Cooling Program Saving 3 Child Safety Feature 1 SETTING UP AND CONNECTION INSTRUCTIONS Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove the Transport Safeguard 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Page INDEX SERVICE