Solution Cooling, Cancel Additional Rinse, Time | AEG 88830 manual

Instructions for use

3.While RINSE+ (RINCAGE+) is flashing, release the button SOAKING (TREMPAGE).

After the flashing stops, the additional rinse is set. It is set until it is

canceled again.

When the additional rinse is set, the indicator RINSE+ (RINCAGE+) lights up on the program sequence disply before the program start and during the additional rinse.

4.If you want to check whether the additional rinse is set:

–Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).

–Briefly press the button SOAKING (TREMPAGE).

The additional rinse is set if RINSE+ (RINCAGE+) flashes on the pro- gram sequence display.

Cancel Additional Rinse:

0 1. Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).

2.Keep the button SOAKING (TREMPAGE) pressed for at least 5 seconds. As soon as the button is pressed, RINSE+ (RINCAGE+) flashes on the program sequence display. After 5 seconds, RINSE+ (RINCAGE+) stops flashing and lights up constantly for a further 5 seconds.

3.While RINSE+ (RINCAGE+) lights up constantly, release the button

SOAKING (TREMPAGE).

After RINSE+ (RINCAGE+) has stopped lighting up, the additional rinse is cancelled.

3	An additional rinse increases water consumption and the program run
	time.

Solution Cooling

	It may be necessary to cool down the washing solution before pumping
	off in order to avoid thermal damage to plastic drainage pipes.
3	The washing solution is cooled down at the end of the main washing
	cycle before pumping off (by incoming cold water).

(This setting is only effective for COTTONS/LINEN (BLANC/COULEURS) at temperatures of over 40 °C.)

No solution cooling is set when the unit is delivered.

40

Image 40

AEG 88830 manual Solution Cooling, Cancel Additional Rinse, Time, Cycle before pumping off by incoming cold water

Contents

ÖKO-LAVAMAT 88830 update Dear customer Contents Solution Cooling What to do if Contents Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General Safety Disposal Environment TipsDispose the packing material For polyoxymethylene, e.g. plastic clips Front View Unit DescriptionDrawer for Washing Powder and Care Agent Control panel Program Selector Wool LAINE/ P Handwash Program Silk SOIE/ P Handwash Program Additional Program Buttons Consumption Values and Time Requirements Running Time Display What Does Update Mean? Water Protection Aqua Control + Aqua Alarm Prepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water Softener Brief Instructions Run a Washing CycleAfter the Washing Program Ends Possible additional programs to suit the type of washing Setting the Washing ProgramSet the program selector to Set the delay timer/soaking duration Delay timer Change the spin speed/Select rinse holdAdapted depending on the washing program COTTONS/LINEN BLANC/COULEURS 1800 revolutions per minute Opening and closing the filling door Soaking durationAdd the Washing If using Liquid Detergent/Tabs Add Washing Detergent and/Care AgentSection Washing Detergents and Care Agents Or for water softener If the delay timer is set Start the washing program Completion of the Washing Program Program sequence displayMulti-display Display Residual MOISTURE%/LOADING% Washing cycle is finished/Remove the washing Abort programIt again Program is finished Too much detergent was used in the just finished Program Tables Washing Separate Conditioning/Starching/Impregnating Separate Spin Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Cleaning the drain pump Before cleaning the drain pumpPump Gency Emptying Remedying Faults What to do if Not been removed Turn off the tap, then Open the water valve fully If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation When all the washing solution has drained off Emergency Unlocking of the Filling DoorAdditional Rinse RINSE+ Set Additional Rinse Solution Cooling Cancel Additional RinseTime Cycle before pumping off by incoming cold water Set the Solution Cooling Additional Rinse and Solution CoolingCancel the Solution Cooling Canceling the Program Saving Function Setting the Program Saving FunctionProgram Saving Child Safety Feature Setting the Child SafetyFeature Cancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for Installation Setting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the Unit Firmly pull both hose holders off the unit Close off the hole with the plug cap G Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mmPage Index Service When do you incur costs even during the warranty period?