Additional Rinse and Solution Cooling | AEG 88830 instruction

Instructions for use

Set the Solution Cooling:

0 1. Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).

2.Keep the button PRE WASH (PRELAV.) pressed for at least 5 seconds. After the button has been pressed for 5 seconds, MAIN WASH (LAVAGE) flashes on the program sequence display for 5 seconds.

3.While MAIN WASH (LAVAGE) is flashing, release the button PRE WASH (PRELAV.).

After the flashing has stopped, the solution cooling is set. It is set until it is cancelled again.

4.If you want to check whether the solution cooling is set:

–Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).

–Briefly press the button PRE WASH (PRELAV.).

If MAIN WASH (LAVAGE) flashes on the program sequence display, the solution cooling is set.

Cancel the Solution Cooling:

0 1. Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).

2.Keep the button PRE WASH (PRELAV.) pressed for at least 5 seconds. As soon as the button is pressed, MAIN WASH (LAVAGE) flashes on the program sequence display. After 5 seconds, MAIN WASH (LAVAGE) stops flashing and lights up constantly for 5 seconds.

3.While MAIN WASH (LAVAGE) lights up constantly, release the button PRE WASH (PRELAV.). After MAIN WASH (LAVAGE) has stopped lighting up, the solution cooling is cancelled.

3	The solution cooling increases water consumption and the program run
	time.

Additional Rinse and Solution Cooling

You can combine the additional rinse and the solution cooling. Setting as under ”Additional Rinse” and ”Solution Cooling”.

41

Image 41

AEG 88830 manual Additional Rinse and Solution Cooling, Set the Solution Cooling, Cancel the Solution Cooling

Contents

ÖKO-LAVAMAT 88830 update Dear customer Contents What to do if Solution Cooling Contents Correct Use SafetyBefore Putting into Operation for the First Time General Safety Child Safety Environment Tips DisposalDispose the packing material For polyoxymethylene, e.g. plastic clips Drawer for Washing Powder and Care Agent Unit DescriptionFront View Program Selector Control panel Silk SOIE/ P Handwash Program Wool LAINE/ P Handwash Program Additional Program Buttons Consumption Values and Time Requirements Running Time Display Water Protection Aqua Control + Aqua Alarm What Does Update Mean? Sort and Prepare the Washing Before the First WashPrepare the Washing Cycle Washing Types and Care Codes Water Softener How much washing detergent and care agent? After the Washing Program Ends Run a Washing CycleBrief Instructions Set the program selector to Setting the Washing ProgramPossible additional programs to suit the type of washing Change the spin speed/Select rinse hold Set the delay timer/soaking duration Delay timerAdapted depending on the washing program COTTONS/LINEN BLANC/COULEURS 1800 revolutions per minute Add the Washing Soaking durationOpening and closing the filling door Add Washing Detergent and/Care Agent If using Liquid Detergent/TabsSection Washing Detergents and Care Agents Or for water softener Start the washing program If the delay timer is set Program sequence display Completion of the Washing ProgramMulti-display Display Residual MOISTURE%/LOADING% Abort program Washing cycle is finished/Remove the washingIt again Program is finished Too much detergent was used in the just finished Washing Program Tables Separate Spin Separate Conditioning/Starching/Impregnating Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum Before cleaning the drain pump Cleaning the drain pumpPump Gency Emptying What to do if Remedying Faults Not been removed Turn off the tap, then Open the water valve fully If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinse Carry Out an Emergency Emptying Operation Emergency Unlocking of the Filling Door When all the washing solution has drained offAdditional Rinse RINSE+ Set Additional Rinse Cancel Additional Rinse Solution CoolingTime Cycle before pumping off by incoming cold water Cancel the Solution Cooling Additional Rinse and Solution CoolingSet the Solution Cooling Program Saving Setting the Program Saving FunctionCanceling the Program Saving Function Setting the Child Safety Child Safety FeatureFeature Cancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection Instructions Remove the Transport Safeguard Setting Up the UnitWhen transporting the unit with a sack trolley Transporting the Unit Close off the hole with the plug cap G Firmly pull both hose holders off the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Dimensions Technical DataDelivery Heads over 1m Measurements in mmPage Index When do you incur costs even during the warranty period? Service