Emergency Unlocking of the Filling Door | AEG 88830 guide

Instructions for use

When all the washing solution has drained off:

6.Firmly push the plug into the emergency emptying hose and turn it tight clockwise.

7.Put the emergency emptying hose back into the holder.

8.Insert the flap into the base panel and close.

Emergency Unlocking of the Filling Door

	When the filling door can no longer be opened, it can be opened with
	the aid of the emergency unlocking facility.
1	Warning! Switch off the washing machine before operating the emer-
	gency unlocking and remove the plug from the mains!

0 1. If you can see water in the viewing window of the filling door, first carry out an emergency emptying operation (see Section ”Carry out an emergency emptying operation”).

2. Open the flap downwards in the right part of the base panel.

3. Turn the rotary knob clockwise with the aid of a coin. The filling door springs open.

Additional Rinse (RINSE+)

	The washing machine is set for extremely economical water consump-
	tion. However, for persons who suffer from allergies, it can be helpful
	to rinse with more water.
3	When this function is set, an additional rinse is performed with the
	programs COTTONS/LINEN (BLANC/COULEURS), EASY-CARES/EASY IRON

(MIXTES/SANS REPASSAGE) and DELICATES (DELICAT). No additional rinse is set when the unit is delivered.

Set Additional Rinse:

0 1. Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).

2.Keep the button SOAKING (TREMPAGE) for at least 5 seconds.

After the button has been pressed for 5 seconds, RINSE+ (RINCAGE+) flashes on the program sequence display for 5 seconds.

39

Image 39

AEG 88830 Emergency Unlocking of the Filling Door, Additional Rinse RINSE+, When all the washing solution has drained off

Contents

ÖKO-LAVAMAT 88830 update Dear customer Contents What to do if Solution Cooling Contents Safety Before Putting into Operation for the First TimeCorrect Use General Safety Child Safety For polyoxymethylene, e.g. plastic clips DisposalEnvironment Tips Dispose the packing material Unit Description Front ViewDrawer for Washing Powder and Care Agent Program Selector Control panel Silk SOIE/ P Handwash Program Wool LAINE/ P Handwash Program Additional Program Buttons Consumption Values and Time Requirements Running Time Display Water Protection Aqua Control + Aqua Alarm What Does Update Mean? Before the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent? Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Setting the Washing Program Possible additional programs to suit the type of washingSet the program selector to COTTONS/LINEN BLANC/COULEURS 1800 revolutions per minute Set the delay timer/soaking duration Delay timerChange the spin speed/Select rinse hold Adapted depending on the washing program Soaking duration Opening and closing the filling doorAdd the Washing Or for water softener If using Liquid Detergent/TabsAdd Washing Detergent and/Care Agent Section Washing Detergents and Care Agents Start the washing program If the delay timer is set Display Residual MOISTURE%/LOADING% Completion of the Washing ProgramProgram sequence display Multi-display Program is finished Washing cycle is finished/Remove the washingAbort program It again Too much detergent was used in the just finished Washing Program Tables Separate Spin Separate Conditioning/Starching/Impregnating Washing Detergent Drawer Cleaning and Care Filling Door Washing Drum Gency Emptying Cleaning the drain pumpBefore cleaning the drain pump Pump What to do if Remedying Faults Not been removed Turn off the tap, then Open the water valve fully If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washing Carry Out an Emergency Emptying Operation Set Additional Rinse When all the washing solution has drained offEmergency Unlocking of the Filling Door Additional Rinse RINSE+ Cycle before pumping off by incoming cold water Solution CoolingCancel Additional Rinse Time Additional Rinse and Solution Cooling Set the Solution CoolingCancel the Solution Cooling Setting the Program Saving Function Canceling the Program Saving FunctionProgram Saving Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Safety Instructions for Installation Setting UP and Connection Instructions Transporting the Unit Setting Up the UnitRemove the Transport Safeguard When transporting the unit with a sack trolley Close off the hole with the plug cap G Firmly pull both hose holders off the unit Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Measurements in mm Technical DataDimensions Delivery Heads over 1mPage Index When do you incur costs even during the warranty period? Service