Standards, Directives and CE Mark, Nameplate | AEG PV.500-MH

Protect PV.500-MH Operating Instructions

3.5Standards, Directives and CE Mark

The equipment complies with currently applicable DIN and VDE regulations. The requirements of BGVA3 are met on the basis of compliance with EN 50274/VDE 0660-51.

The requirements of VDE 0100, Part 410, IEC 60364-4-41, "Func- tional extra-low voltage with safe isolation" and IEC 62109, "Safety of power converters for use in photovoltaic power systems" have been complied with where applicable.

The CE mark on the unit confirms compliance with the EC frame- work directives for 2006/95/EC (Low Voltage) and for 2004/108/EC (Electromagnetic Compatibility), provided that the actions outlined in the instructions are observed.

3.6Nameplate

The following information appears on the nameplate:

Figure 4 Rating plate (example)

22 of 68

80000043212 BAL

Image 22

AEG PV.500-MH manual Standards, Directives and CE Mark, Nameplate

Contents

Protect PV.500-MH Operating Instructions AEG Power Solutions GmbH Table of Contents System Function Monitoring Systems, Messages and FaultsInterfaces Graphical Display and Operation Unit General Information Information on How to Use these InstructionsWarranty Validity Obligations of the Equipment Operator Target GroupsExplanations of Target Groups Handling Skilled Personnel Skills and Training Storing Instructions Obligations of skilled personnel Explanation of Symbols Explanation of Symbols and Safety InstructionsSymbol Meaning Hazard Symbols Used Safety InstructionsSignal Words Used Symbol Meaning for skilled personnel Signs Containing Orders for Personal Protective Equipment Safety Awareness Emergency Procedure e.g. in the Event of a FireAbbreviations Thin-film cells Particular Dangers associated with Photovoltaic SystemsLightning protection System stop switch Safety Signs and Warning Notices on the EquipmentSafety and Protection Devices for the Equipment Protective Covers Guard Lockable Equipment DoorsResidual Hazards Electrical Hazards Water in electrical equipment Risks Due to Moving PartsFire-Related Risks Risk of injury due to rotating fans Risks from Maintenance and Repair Work Risks due to Loss of Control Product Description Product DetailsImportant information about equipment documenta- tion Appropriate Use Dimensions and ViewsSafety Inappropriate Use Standards, Directives and CE Mark Nameplate Technology Operating Elements System Description Individual Operation OFF Status System FunctionDescription of Sequence Control Waiting for Feed Conditions Status Operation Status Waiting Status Sequence Control During the Course of the Day Fault StatusNight Status Early morning Later in the evening DayEvening Night Power limit value for shutdown, delay time for shutdown Inverter stack switch-on timePermissible voltage dip after switching on the stack Sequence Control Parameters Description of Fan Control General Fan Control, Cabinet Fan Cabinet Fan Control Parameters Fan Control, Inverter Stack Fan Parameters of Inverter Stack Fan Control Igbt temperature limit value for switching off the fanIgbt temperature limit Insulation Monitoring and Earthing of PV Cells General Protect PV.500-MH Operating Instructions General Maintenance modeOperation with Thin-Film Solar Cells Sequence control Insulation Monitoring Parameters Delay for shutdown of K21 in night operationMinimum time in maintenance mode MPP Tracker Monitoring Systems, Messages and Faults Table of Faults Temperature monitoring systems Can I/O monitoring systems Fault/Message Unit Monitoring Systems Fault/Message DC voltage monitoring systems Fault/Message Interfaces Communication Interface Communication data port 2 Technical Data MultiCom CCC hardware data assembly A29.1Communication data port 1 Communication data port 3 Connections Configuration jumpersStructure of the MultiCom CCC Interface Button Description of serial interfaces Port 2 X5 RS485 pin assignment default Shield connection of the RS485 bus line Controller Area Network can at ConfigurationPort 2 X5 RS232 pin assignment Port 3 X4 can pin assignment Configuration Preparations Setting the terminal program Protect PV.500MH Operating Instructions Configuring the Modbus Protocol Data protocol configuration Configuring Modbus Data Transmission Modbus/JBus data transmission configuration COM Server General Structure of the COM Server internally wired to A93Network Connection Installation of the COM Server Network Integration Configuration Configuration of the Virtual COM Port Technical data Remote SignallingStructure Following default signals are used for remote signalling Graphical Display and Operation Unit DOU Keyboard Operation SignallingAcoustic signal generator LEDs Possible symbol keys and their function Start-up Menu Structure Menu Tree Main Menu Operating Display Operating display Normal operation Examples of possible displays Example of operating display Solar radiation is too low, the inverter is in standby mode Monthly data t = day 1 31 for the last 12 months Example of yearly overview Menu Status/Measured Values Blocking Menu Inverter example Service Fault HistorySettings Information