AEG PV.500-MH manual Configuring Modbus Data Transmission

Protect PV.500_MH Operating Instructions

7.1.4.3 Configuring Modbus Data Transmission

To access the X5 data transmission configuration, you must press <2> in the main menu:

Figure 21 Modbus/JBus data transmission configuration

Press one of the following keys in the “X5 Data Transmission” menu:

∙<1-7> to set the baud rate.

∙<n,e,o> to set the parity.

∙<8,9> to set the number of stop bits.

∙<CR> to accept the set values. The configuration is finished and the main menu is opened again.

∙<ESC> to cancel the configuration. This opens the main menu. The Modbus factory setting is: 19200 8 E 1.

80000043212 BAL 51 of 68