Protect
Use the bottom key with the measuring instrument symbol to call up menus with detailed information on the status and the meas- ured values. This key flashes in the event of a fault in the unit, en- abling you to access menus containing additional fault information directly.
8.3.4Status/Measured Values
You can call up the "Status/Measured values" menu from the op- erating display
using the bottom key with the measuring instrument symbol. Here you can use the "<", ">", "^" and ENTER keys to open the submenus containing the statuses and measured values for the individual unit components.
Press the ENTER key to return to the Status/Measured values menu.
-- Status/data --
Photovoltaic
Inverter
AUX signals
Grid side
COM interface
Menu
Figure 39 Menu: Status/Measured values
You can use the "Photovoltaics" menu item to display the meas- ured values for the panels. Any faults in the DC distribution are shown here too.
| ||
UDC.[V]: | 600 | |
IDC.[A]: | 481 |
|
PDC[kW]: | 289 |
|
Figure 40 Photovoltaics menu (example)
You can use the "Incoming mains" menu item to display the meas- ured values for the incoming mains. Any mains faults or faults in the AC distribution are shown here too.
270 | 270 | 270 | |
587 | 587 | 587 | |
F....[Hz]: | 50.0 | Failures: 2 | |
Figure 41 Menu: Incoming mains (example)
66 of 68 | 80000043212 BAL |
