AGFA Printer 5. Ink Circuit.

:ANAPURNA L/XL OPERATOR MANUAL

AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]10]8/09/2006]

5. Ink Circuit.

5.1. Main ink tanks

- The main ink tanks are located on the right

side of the engine.

- 1.6 liter per color

- Low level detection at 0.3l. (± 4h to print)

Audible & visual alarm on the Signal tower.

- Ink can be refilled in while printing

- White ink tank has a continuous working

stirring rod inside.

- Tanks:

WARNING

ONLY refill with the 1liter bottle, when the low level alarm goes off.

At that point, you can pour in a complete 1L bottle, and you won’t have any

left over ink remaining in the bottle!!

5.2. Auto ink supply

- From the ink tank, ink is pumped into

the “Sub ink tank”, which is positioned

on the Head Carriage.

- The Sub ink tank is temperature

controlled, and has a content

of 35ml per color

5.3. Sub Ink Tank

- Temperature setting “Sub Ink Tank”

Color: 38°C

White Ink: 40°C when in use (up to max 45°C)

35°C when not in use

Contents

Main : AB] TABLE OF CONTENTS 1. Safety Instructions. 2. Printer Overview and Features. Page COVER OPEN SENSOR 2.3. Head Carriage view, parts 2.4. Signal tower 3. Head technology. 4. :Anapurna UV Curable Ink. 4.1. General information 4.2. Color gamut 4.3. Packing 5. Ink Circuit. 5.1. Main ink tanks 5.2. Auto ink supply 5.3. Sub Ink Tank Page 5.4. The 2-Way valves 5.5. Printing heads Page 5.6. Ink Refill System what can go wrong If the problem persists. - - Operator: If the problem persists. 6. UV Curing System. 6.1. General information - 6.2. Curing setup and sequences 6.3. Uni- and Bi-directional printing 7. Printing Table. 7.1. General information 7.2. Belt Tension control 7.3. Maintenance 7.4. Replacement of Conveyor belt 8. Maintenance. 8.1. General information 8.2. Daily Maintenance Nozzle check/purge Page Page 8.3. Weekly Maintenance 8.4. Long Stand Still This procedure must be carried out: Page 9. Media Setup. 9.1. Roll to Roll Page 9.2. Rigid Media Page 10. Head Base Height Control. 10.1. Automatic Head Base Height Setup Page 11. :Anapurna Control Program. 11.1. Control Program Menu 11.2. Setup Parameter Menu Page Page Page 11.3. Test Menu Page 12. Printing an image. 12.1. Preparing an image 12.2. Preparing the :Anapurna 12.3. Printing the image 12.4. Cancel a print 12.5. Purge function on the printing 13. Tips & Tricks. 13.1. Printing on heat sensitive media: 13.2. Media corners lift a bit up (rigid media): 13.3. Image size/border: (Wasatch Rip)