AGFA Printer manual Anapurna Control Program, Control Program Menu, Display Printing Progress

:ANAPURNA L/XL OPERATOR MANUAL

11. :Anapurna Control Program.

11.1. Control Program Menu

The :Anapurna Control program on the engine’s PC:

1	: IMAGE display window
2	: IMAGE SIZE display window	9	: Setup Menu, to Change Parameters
3	: Move Carriage to “Purge” position	10	: Press to Open TEST menu
4	: Move Carriage to ‘Home” position	11	: Select PASS mode
5	: Move loaded media Fwd/Back	12	: Push to start Printing
6	: STATUS Message display window	13 : Open image file(.rtl) to be printed (*)
7	: Display Printing Progress	14	: Lift head to highest position (>50mm)
8	: Set Top (forward) and Left Margin	15	: Select to Uni-Directional printing (**)

(*)When you open an image file (.rtl), which is sent from the Rip station, you’ll get an on-screen preview and it will also show the image size and nr. of passes the image is ripped for. (if an image is ripped for 6 pass, and you print it at 8 pass, it will result in an un-proportionally scaled printout)

(**)Regardless the image file, you can always choose between printing Uni- or Bi-directional.

AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]32]8/09/2006]