1 Installing and Configuring the 82350
N O T E
cover from the PC to allow access to the I/O slots. See your PC documentation for instructions.
Take precautions against static discharge when handling and installing cards.
Figure 1-4 Remove the PC cover
3Remove a Cover Plate. Remove one of the PC back panel cover plates. The 82350B is a 5V PCI card and will not fit in a 3.3V PCIe slot or in an EISA or ISA slot. Choose a 5V PCI slot that will give adequate clearance for the GPIB connector.
Figure 1-5 Remove the card slot
4Install the 82350. Insert the 82350 Interface Card edge connector into the PCI expansion slot connector of the PC. Make sure the interface is fully seated by pushing firmly on the top edge of the card with the palm of your hand. The GPIB
18 | 82350B Installation and Configuration Guide |
