![](/images/new-backgrounds/1265601/26560161x1.webp)
Installing and Configuring the 82350 1
connector should extend through the back panel opening to allow GPIB cable connection. If you install more than one 82350, you may want to install the cards so there is at least one empty slot between 82350s. When inserting the 82350, be sure to hold the card by its edges. Also, be careful with the metal faceplate around the GPIB connector as the faceplate can be bent.
Figure 1-6 Install the 82350B
5Replace the Cover Plate Screw. This will hold the 82350 in place. Save the blank cover plate for use if the 82350 is later removed. Replace the PC cover(s) as described in your PC documentation.
Figure 1-7 Replace the cover plate screw
Connecting instruments to the 82350
82350B Installation and Configuration Guide | 19 |