OPERATION
•Check that the main driveline securely attached to the tractor and the locking collar is seated in the groove of the PTO Shaft.
•Ensure wing hydraulics are secure at both ends.
•Ensure the mower hitch is securely attached to the tractor drawbar with a proper size bolt and secured nut.
•Ensure that a properly rated safety tow chain is equipped securing the mower to the tractor.
•Ensure rubber deflectors are in position and not damaged. Replace worn, broken, and missing sections immediately.
•Ensure the rollers are in good condition and rotate freely.
•Ensure the driveline integral shield is in good condition and rotate freely.
•Inspect that all bolts and screws are in position and are properly torqued.
•Inspect the condition of the wings and rear section drive belts.
•Ensure the slip clutch (rear mower section only) is properly adjusted and the friction plates are not frozen together. Reference the Maintenance Section for proper slip clutch maintenance.
•Ensure the slip clutch shield and drive belts shields are in place and in good repair.
•Ensure the tractor PTO master shield is in place, lowered and in good condition.
INTERSTATER 03/09 | Operation Section |
© 2009 Alamo Group Inc.
