ASSEMBLY
RX60/72/84 03/09 Assembly Section 3-6
© 2009 Alamo Group Inc.
ASSEMBLY
A-FRAME INSTALLATION (Model RX60-RX72
1. Attach the A-Frame Bars (2) to the right and left Hitch Lugs (14 & 15) with two 5/8” x 2” bolts (16), 5/8”
washers (17), bushing (18) and 5/8” locknuts (19).
2. Attach the Lift Strap Bars (1) to the Mainframe with two 5/8” bolts (16), 5/8” flatwasher (17), bushing (18)
and 5/8” locknut.
3. Attach flex links (3) to A-Frame bars (2) with 5/8” x 3” carriage bolts (7), bu shings (8), flatwasher (9) and
nut (10).
4. Insert quick hitch bushing (5 ) be twe en A-F ra m e an d inser t 5/8 ” x 4-1/2 ” bo lt (4 ) an d 3/ 4” lockn ut (6) .
5. Insert 5/8” x 2-3/4 bolt (11) through center holes in flex links (3) with bushing (12) through forward holes in
rear braces (1).
6. Insert bolt (13) through 2nd hole from front in rear braces (1) and secure with locknut (10).
7. Insert 5/8” x 2-3/4” bolt (11) through rear holes in flex links (3 ) through bushing (1 2) with bushing o ver or on
top of rear braces (1). Figure Asm-R-0404