ASSEMBLY

WHEELS (Model RX84 Only)

Install the Wheels on the Wheel Hubs. Note: If Laminated Tires are used, place the flat side of the Lug Nut against the Wheel Asm-R-0127.Note direction of travel and curvature of rubber segments in tire and install as shown in Asm-R-0127.

Front and Rear Deflectors (Standard Equipment)

Front and Rear rubber-fabric Deflectors are Standard Equipment and Front and Rear Chain Guards are optional . One type of guard must be installed (and maintained in good repair) except for agricultural purposes only in areas where persons, vehicles, livestock, or other property will not be endangered by thrown objects and where such safety equipment would prevent the mower's reasonable performance of its assigned agricultural task. Assy01- Shielding

Deflectors: Front and Rear Deflectors (Standard Equipment) are recommended for the average user and will provide protection from thrown objects with proper operation under normal conditions. Deflectors must be maintained in good repair or replaced after no more than two inches of wear off lower edge.

RX60/72/84 03/09

Assembly Section 3-9

© 2009 Alamo Group Inc.

ASSEMBLY

Page 91
Image 91
Alamo 00785503C, RX72, RX60 manual Wheels Model RX84 Only, Front and Rear Deflectors Standard Equipment