Alamo RX72, RX84, RX60, 00785503C manual Setting Deck Pitch-Lift and Semi-Mount Type

OPERATION

7.5 Setting Deck Pitch

To facilitate safe and efficient operation, the mower should be operated with the deck approximately

3/4” LOWER IN THE FRONT THAN THE REAR.

Setting Deck Pitch-Lift and Semi-Mount Type

1.Lower the mower until the rear of the mower is resting securely on its tail wheel.

2.Lower the 3-point lift arms further until the front of the mower is at least 3/4” lower than the rear.

3.Place the tractor’s 3-point control lever stop at

this point to maintain the deck pitch. OPS-R-0067

8. DRIVELINE ATTACHMENT

The driveline yoke and tractor PTO shaft must be dirt free and greased for attachment.

To connect the mower driveline to the tractor PTO output shaft, pull the driveline yoke collar back and align the grooves and splines of the yoke with those of the PTO shaft. Push the driveline yoke onto the PTO shaft, release the locking collar, and position the yoke until the locking collar balls are seated onto the PTO shaft. Push and pull the driveline back and forth several times to ensure a secure attachment. OPS-R-0003_A

When attaching the Implement input driveline to the Tractor PTO, it is important that the connecting yoke spring activated locking collar slides freely and the locking balls are seated securely in the groove on the Tractor PTO shaft. Push and pull the driveline back and forth several times to ensure it is securely attached. A driveline not attached correctly to the Tractor PTO shaft could come loose and result in personal injury and damage to the Implement. (S3PT-17)

RX60/72/84 03/09 Operation Section 4-17

OPERATION

© 2009 Alamo Group Inc.