Alamo RX60, RX72, 00785503C manual Axle Assembly, Hydraulic or Manual Lift Model RX84 Only

ASSEMBLY

ASSEMBLY

AXLE ASSEMBLY

Attach rear axle (1) to the lugs on the rear of the mainframe using 3/4 x 3 (8) bolts, bushings (7), flatwashers

(4)and locknuts (6). Tighten all bolts. Attach level lift rod assemblies to axle (1) Figure Asm-R-0406and tongue (1) Figure Asm-R-0405using clevis pin (15), flatwashers (31) and cotter pin (38). NOTE: The adjusting nuts on control rods should be to rear of machine. Figure Asm-R-0406

HYDRAULIC OR MANUAL LIFT (Model RX84 Only)

Install the Hydraulic Cylinder or the manual Ratchet Lift Screw (Asm-0039)between the Axle Center Lug and the Lug directly behind the Center Gearbox. Install cylinder pins provided and retain with cotter pins. NOTE: Figure ASM-0038 shows optional spring shock installation.

RX60/72/84 03/09 Assembly Section 3-8

© 2009 Alamo Group Inc.