Alamo 00785503C manual Standard Equipment and Specification, RX60 RX72 RX84

OPERATION

1.Standard Equipment and Specification

	RX60	RX72	RX84
Horsepower Required *(Min)	35 Min. HP	45 Min. HP	65 (Lift) 30(Pull)
Cutting Capacity (Max.)	2-1/2”	2-1/2”	2-1/2”
Cutting Height (Min)	1-1/2” Min.	1-1/2” Min.	1-1/2’ Min
Safety Deflector	Std.	Std.	Std.
Cutting Width	60”	72”	84”
Overall Length	111”	123”	138-1/2”
Weight (Approx.)	998 lbs.	1158 lbs.	1540 lbs.
Hitch	CAT I, II, II Q.H.	CAT I, II, II Q.H.	CAT II, III QH, or Pull
Blade Carrier	-------- All Units use Cross Braced, Round Pan Blade Carrier --------
Blade Tip Speed (FPM) 540 RPM	13,572	16,286	16,328
1000 RPM	n/a	n/a	15,994
Gearbox Rating** 540 RPM	130 HP*	130 HP*	130 HP*
Output Shaft Diameter	2”	2”	2”
Driveline Size	Cat 4	Cat 4	Cat 4
Driveline Protection	Slip Clutch	Slip Clutch	Slip Clutch
Deck Thickness	10 Ga.	10 Ga.	10 Ga.
Side Skirt	1/4” x 11”	1/4” x 11”	1/4” x 11”
Transport Width	67-1/2”	79-1/2”	89-1/2”
Replaceable Skid Shoes	Std.	Std.	Std.
*Ratings based on actual field performance.
** Ratings based on actual field performance
EXTRA EQUIPMENT		OPTIONAL EQUIPMENT
Check Chains (Lift-Type)		Front and Rear Single or Double Chain Guards
Offset Adapter (RX60-RX72)		1 or 2 Tailwheels (RX84 Lift-Type)
Spring Shock Absorber (284 Pull-Type)		540 or 1000 RPM (RX84)
		Foam-Filled Used AirplaneTire & Wheel

Laminated, Used Airpland Tire & Wheel

15” Wheel, or Implement Tire and Wheel (RX84 Pull)

The Mower is designed for certain mowing applications and is rated to cut up to a specific size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut vegetation above the Mower’s rated capacity or to cut any type of non- vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component damage and equipment failure resulting in possible serious injury or death. (SGM-14)

RX60/72/84 03/09 Operation Section 4-3

© 2009 Alamo Group Inc.

OPERATION