© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
19
70420801 (EN)
9. Check the airflow switch operation by opening
the lint panel; be sure to remove shipping tap e
from airflow switch prior to operation.
Temporarily tape down the lint panel safety
switch located behind the upper left corner of the
lint panel. The heating systems should shut off
when the lint panel is opened a maximum of
6 inches (152.4 mm). The airflow switch
operation may be affected by lack of make-up air
or an obstruction in the exhaust duct. These
should be checked; if there is a problem, contact
an authorized service person.
10. Wipe out the cylinder using an all-purpose
cleaner or detergent and water solution.
If tumble dryer does not meet any of the listed
requirements, remove tumble dryer from ser vice.
Refer to Removing Tumble Dryer from Service
section.
Required for CE Models Only
Once machine is installed, please be sure to complete
the following items:
Review and verify machine operation wit h
customer.
Leave all literature and a signed Declaration of
Conformity with customer.
Review machine warranty information with
customer.
Apply warning sticker on front panel of machine,
in language appropriate to country of sale
(included in literature packet).
The tumble dryer must not be operated if
the airflow switch does not operate
properly. Faulty airflow switch operation
may cause an explosive gas mixture to
collect in the tumble dryer.
W072R1
WARN ING