Machine Dimensions
Dimensional Clearances
Allow a minimum of 24 inches (60 cm) at the rear and 6 inches (15.24 cm) at the sides for maintenance, inspection, and adjustment. Allow at least 6 inches (15.24 cm) between machines in multiple installations.
Specifications and Dimensions
NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice.
WARNING
Crush hazard.
To avoid personal injury and/or property damage, do not tip the UW150 machine more than 25 degrees in any direction.
W642
UWTV Models Through 3/31/09
(Refer to Figure 3 and Figure 4)
Dimension | 35 |
| 60 |
| 80 |
| 100 |
| 125 |
|
| 150 | |
|
|
|
|
|
|
|
|
|
|
|
| ||
in | mm | in | mm | in | mm | in | mm | in | mm | in | mm | ||
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
A | 30.125 | 765 | 35.625 | 905 | 41.125 | 1045 | 41.125 | 1045 | 48 | 1219 | 50.25 | 1277 | |
B1 | 33.375 | 848 | 36.625 | 930 | 41.5 | 1054 | 41.5 | 1054 | 48 | 1219 | 50.25 | 1277 | |
C | 23.75 | 603 | 28.25 | 718 | 29 | 737 | 29 | 737 | 29 | 737 | 32 | 813 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
D | 43.625 | 1108 | 45 | 1143 | 51.5 | 1308 | 54.5 | 1384 | 58 | 1473 | 63 | 1600 | |
E2 | .5 | 13 | 1 | 25 | 3 | 76 | 3 | 76 | 1.5 | 38 | 2.9 | 73 | |
F | 55.5 | 1410 | 64.5 | 1638 | 68.5 | 1740 | 68.5 | 1740 | 72 | 1829 | 79 | 2007 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
G2 | 36 | 914 | 36 | 914 | 43.75 | 1111 | 43.75 | 1111 | 48 | 1219 | 56 | 1422 | |
H | 8 | 203 | 15.5 | 394 | 16.875 | 429 | 16.875 | 429 | 11.375 | 289 | 15.75 | 400 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
J | 43.14 | 1096 | 49.8 | 1265 | 53.54 | 1360 | 53.54 | 1360 | 56.4 | 1433 | 62.85 | 1596 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
K | 46.64 | 1185 | 53.3 | 1354 | 57.04 | 1449 | 57.04 | 1449 | 59.9 | 1521 | 66.35 | 1685 | |
L | 5.12 | 130 | 5.12 | 130.05 | 7.12 | 181 | 7.12 | 181 | 7.12 | 181 | 7.12 | 181 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
M | 2.62 | 66 | 2.62 | 66 | 3.62 | 92 | 3.62 | 92 | 3.62 | 92 | 3.62 | 92 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
N | 1.37 | 35 | 1.37 | 35 | 2.25 | 57 | 2.25 | 57 | 2.25 | 57 | 2.25 | 57 | |
O | 3.87 | 98 | 3.87 | 98 | 5 | 127 | 5 | 127 | 5 | 127 | 5 | 127 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
P | 2.5 | 64 | 2.5 | 64 | 2.75 | 70 | 2.75 | 70 | 2.75 | 70 | 2.75 | 70 | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Q | 2.5 | 64 | 2.5 | 64 | 3.5 | 89 | 3.5 | 89 | 3.5 | 89 | 3.5 | 89 |
1Overhang dimensions for the optional starch dispenser are as follows: UW35TV, 3.88 inches (9.86 cm); UW60TV, 1.75 inches (4.45 cm);
UW80TV and UW100TV, 0.33 inch (0.83 cm). (The starch dispenser does not overhang the UW125TV.) (No longer available.)
2The overhang dimension for the premium wet clean module option (compatible with
Table 1
F8138601 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 15 |
