Specifications and Dimensions |
| |||
Chemical Injection Supply System | Undiluted chemical dripping can damage the washer- | |||
|
|
|
| extractor. Therefore, all chemical supply dispenser |
|
|
| WARNING | pumps should be mounted below the washer’s |
|
|
| injection point. All dispenser tubing should also run | |
Wear eye and hand protection when | below the injection point. Loops do not prevent drips | |||
handling chemicals; always avoid direct | if these instructions are not followed. Failure to follow | |||
contact with raw chemicals. Read the | these instructions could damage the machine and void | |||
manufacturer’s directions for accidental | the warranty. Figure 27 shows a typical Chemical | |||
contact before handling chemicals. | Injection Supply System. | |||
Ensure an |
| |||
emergency shower are within easy reach. |
| |||
Check at regular intervals for chemical |
| |||
leaks. |
| |||
|
| SW016 |
|
| 2 |
| 3 |
|
|
| |
| 1 |
|
|
| 4 |
|
|
|
|
| PHM825N |
1 | Injection Point | 3 | Chemical Dispenser Pump Outlet |
2 | Loops | 4 | PVC Pipe |
Figure 27
52 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F8138601 |
