Table of
Contents
Safety Information | 2 |
Explanation of Safety Messages | 2 |
Important Safety Instructions | 2 |
Safety Decals | 4 |
Operator Safety | 5 |
Safe Operating Environment | 6 |
Environmental Conditions | 6 |
Machine Location | 6 |
Input and Output Services | 7 |
AC Inverter Drive | 7 |
Introduction | 8 |
Model Identification | 8 |
Delivery Inspection | 9 |
Name plate Location | 9 |
Nameplate Location - UniLinc Models | 9 |
Replacement Parts | 9 |
Customer Service | 9 |
Specifications and Dimensions | 11 |
Machine Dimensions | 15 |
UWTV Models Through 3/31/09 | 15 |
UW Design 1 and Design 2 Models |
|
Starting 4/1/09 Through 10/3/10 | 18 |
UW Design 3 Models starting 10/4/10 | 21 |
Machine Foundation Requirements | 24 |
Concrete Foundation Pad Installation | 25 |
Floor Load Data | 27 |
Mounting Bolt Installation Requirements | 30 |
Machine Mounting and Grouting | 31 |
Mounting Bolt Hole Locations | 32 |
Grout Placement | 37 |
Gap Setting for Vibration Switch | 38 |
Drain Connection Requirements | 42 |
Water Connection | 44 |
Electrical Installation Requirements | 46 |
Steam Requirements (Steam Heat Option Only) | 51 |
Chemical Injection Supply System | 52 |
External Supplies | 55 |
Chemical Injection Using Internal 24VAC Control Transformer ... | 56 |
Chemical injection Using External AC Power Source | 57 |
External Supply Signals | 58 |
© Copyright 2011, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
F8138601 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 1 |