Allied Telesis AT-9000/52, AT-9000/28SP manual

Chapter 8: Setting the MAC Address

Deleting a MAC Address

Deleting a Unicast Address

Deleting a

Multicast

Address

To delete a MAC address from the MAC address table, see the following procedures:

“Deleting a Unicast Address” on page 102

“Deleting a Multicast Address” on page 102

To delete a unicast address or clear all static or dynamic unicast addresses, do the following:

1.Select the Switching tab.

The Switching tab is displayed. See Figure 32 on page 96.

2.Select Mac Table and then move the cursor to the right to select Unicast.

The Unicast MACs page is displayed. See Figure 33 on page 97.

3.Do one of the following:

To clear all of the static unicast addresses in the MAC address table, click Clear Static.

To clear the dynamic unicast addresses in the MAC address table, click Clear Dynamic.

To delete a specific MAC address, click Delete next to the MAC address that you want to delete.

To delete a multicast address or clear all static or dynamic multicast addresses, do the following:

1.Select the Switching Tab.

The Switching Tab is displayed. See Figure 32 on page 96.

2.Select Mac Table and then move the cursor to the right to select Multicast.

The Multicast MACs page is displayed. See Figure 34 on page 98.

3.Do one of the following:

To clear all of the static multicast addresses in the MAC address table, click Clear Static.

To clear all of the dynamic multicast addresses in the MAC address table, click Clear Dynamic.

102